ENTIBADOS
ESC ha desarrollado completamente su serie de protección de zanja (también conocida como caja de zanjas),Es un sistema de soporte de excavación económico, de dos lados y de alta calidad que proporciona un entorno de trabajo seguro en zanjas de hasta 12m de profundidad. Los entibados tipo cajas de zanjas de ESC son un diseño robusto de alta resistencia diseñado y fabricado de conformidad con las normas nacionales e internacionales. Todos los entibados cajas de zanjas están certificados por ingenieros profesionales externos, siguiendo las pautas y recomendaciones de NAXSA (Asociación de apuntalamiento de excavación de América del Norte) y cumplen todo los estanderes de OSHA. ESC escudos de zanjas están disponibles para la venta o alquiler.
Trench Shields for Sale or Rent
BUILT TO LAST
ROBUST CELLULAR DESIGN
FEATURES
* Depth ratings include consideration of surcharge load of 72 psf.
* All 4’ and 6’ shields can be used as Extension Shields.
* As per NAXSA recommendations, depth of cut has been limited to 40ft for types A, B and C60 soil, and 30ft for C80 soil regardless of the capacity of the shield. If deeper cuts are required, it is recommended that a professional engineer is engaged to evaluate the site and soil conditions and specify a suitable trench shield or other shoring solution.
SAFETY GUIDE
-
Soil type to be determined by qualified competent person.
-
Assembly as per ESC procedures
-
As member of NAXSA (North American Excavation Shoring Association) ESC adheres to all industry norms and regulations. We advise all clients to refer to NAXSA Approved Excavation Safety Regulations.
Design Verification
TRENCH SHIELDS FEATURES
-
Designed & manufactured in accordance with OSHA 29 CFR 1926.650, 29 CFR 1926.651 and CFR 1926.652, Subpart P, Excavations.
-
3rd party product certificates are available for all products.
-
Heavy-duty robust design.
-
Flatpack delivery .
-
Fixed or adjustable spreaders are available in any required length.
-
Custom box sizes are available.
-
All TSB series panels are fully welded for maximum strength. No stitch welds or spot welds were used.
-
3/4" standard push pads.
-
Reinforced knife-edge supplied as standard on 8ft and 10ft height shields. 4ft and 6ft shields supplied with flat bottoms as standard. Knife-edge and flat bottom interchangeable on request
(Options)
-
Additional Stack pockets
-
Fifth lower spreader
-
Pulling lugs
Trench Shield Assembly & Installation
ESC Trench Shoring, Inc. has been on a mission to help the Construction Industry in meeting the Trenching and Excavation Requirements of 29 CFR 1926.651 and 1926.652 or equivalent OSHA requirements in different regions and states.
This 2020 edition of our product infographics serves as a comprehensive and straightforward assembly and installation guide of our trench shoring products in a wide range and varieties.
Product Images






Project Case Studies





